Wood borer treatment is a medical service, that needs the service of an oil base and a combination of disinfectant and contact chemicals to preserve the wood without damaging its texture and quality Wood borer treatment is a service, needing the service an oil base and a combination of disinfectant contact chemicals to preserve the wood without damaging its texture and quality of polishing.
This needs the disinfectant to enter the exit hole and spray on the wood-filled area of the furniture to have an effective effect against the wood veneer. In this blog, you will read about the 4 methods of borer treatment that are used by a Pest Control Company in Adelaide for the best way to control and prevent wood borers.
What are the 4 methods of Borer Treatment?
1. Injection of trunk
Who uses the treatment: Licensed Pesticides
Treatment: A pesticide user will pierce the bark on the outer bark of the tree of ash, where the pesticide will be injected.
Duration: 1-3 years, it depends on the product selected.
Effectiveness: As regulated by a licensed expert in tree care, some herbal remedies have shown the effectiveness of up to 90% in controlling EAB, making this the most effective treatment.
Disadvantages: Cost and possible digging wounds. Although the best trunk injections that last for many years are more costly than others.
2. Wet soil or drenched soil
Who uses the treatment: Expert pesticides or landowners (if the ash tree is less than 12” times chest height)
Treatment process: Although soil moisture varies, it is applied in liquid form or as granules and then irrigated in the soil around the tree after the subsoil has been cleared. Thus allowing soil moisture to hold the roots of the tree.
Reoccurrences: The ideal frequency varies with the product and the size of the portable ash tree. But you can not use soil moisture treatments more than once a year.
Efficiency: Incompatible. In some trials, EAB control was very positive, while others reported negative results. Having said that, the pouring of the soil by the tree expert seemed to work best.
Disadvantage: Environmental performance and impact. Although they appear to be more effective in controlling EAB than non-treatment, soil pouring is more likely to fail than stem injections. And they may even touch plants, insects or animals that may be close to a tree.
3. Bark spritz
Who uses the treatment: Expert pesticides
Treatment: They spray the insecticide under five to six feet in an ashtray using a standard garden spray. They then enter the bark and are transported from the tree.
Frequency: Once a year
Efficiency: Incompatible. The results of the experimental effectiveness of the bark spray had similar results when compared with the soil moisture test.
Disadvantage: Environmental performance and impact. Pesticides can affect nearby plants, which may affect plants, insects or nearby animals.
4. Remove and substitute
Who uses the treatment: Tree expert
Treatment process: While some homeowners may not have enough experience to plant a tree themselves, removing a tree is a complex process that needs a tree expert – often for good reasons.
Frequency: Just once
Efficiency: 100%. Although finding a new tree to hold has its challenges, removing and disposing of the ash tree is 100 per cent effective in controlling the spread of EAB.
Disadvantages: Loss of a tree that can have an internal value to the property owner.
Any treatment recommendations, including those that identify specific active ingredients, are designed to benefit people. Early detection is key to controlling the threat posed, so don’t wait to identify if you have an ash tree, always check those trees. With the attack of a woodworking beetle, treatment of many spots is possible. These include wood moisture borer pest control, the use of overlay covers, freezing, & pesticide. Moisture problems are often found on logs in crawling areas. This is a low-toxic way used for indoor wood protection. You can also use it to treat wood for interior construction. So, it includes joists, sheathing, sill plates and other materials.